Eni Industrial Oils
This category includes lubricants of all types intended for the lubrication of industrial machinery, such as hydraulic oils, turbine oils, compressor oils, bearing oils and industrial gear oils.
Among all these categories, the one on which the highest volumes is hydraulic oils which are used in the hydraulic controls of building machinery, industrial plants etc.
Euro 1 and Trion
Hydraulic Oil
Hydraulic systems (or circuits) consist in a set of components filled with a fluid that is responsible for energy transmission with great flexibility and under controlled conditions. Hydraulic oils in this system must have technical characteristics and performance suitable for every kind of machinery and operative conditions, in order to ensure good operation of the systems and provide relevant protection of all lubricated components to extend their service life. Eni, according to technological standards, produces modern and advanced mineral or synthetic lubricants suitable for any kind of hydraulic systems. Synthetic oils are specifically required where a greater environmental protection (biodegradability) or a greater protection from fire hazard (fire resistant) is required. Eni has recently introduced a new range of products specifically developed for food industry, FDA and NSF certified.
Arnica
Spesification
ISO-L-HV
AFNOR NF E 48603 HV
BS 4231 HSE
DIN 51524 teil 3 HVLP
CETOP RP 91 H HV category
CINCINNATI P-68
P-69 and P-70
DENISON HF 0
VICKERS M-2950
Description
ARNICA ID oils are petroleum base lubricants specially developed for use in hydraulic systems requiring fluids possessing an extremely high Viscosity Index and a very low pour point for correct operation (ISO-L-HV classification).
Spesification
Danieli Standard 0.000.001
Description
ARNICA S FR ID is a non-flammable hydraulic fluid with high Viscosity Index and low pour point which satisfies the requirements of hydraulic circuits in industrial machinery.
It consists of a glycol/water solution additive-treated to prevent corrosion. (ISOHFC classification) The fire-resistance of the product is essentially attributable to its water content.
Spesification
Danieli Standard 0.000.001
Description
ARNICA S FR ID is a non-flammable hydraulic fluid with high Viscosity Index and low pour point which satisfies the requirements of hydraulic circuits in industrial machinery.
It consists of a glycol/water solution additive-treated to prevent corrosion. (ISOHFC classification) The fire-resistance of the product is essentially attributable to its water content.
Spesification
ISO-L-HV
AFNOR NF E 48603 HV
BS 4231 HSE
DIN 51524 teil 3 HVLP
CETOP RP 91 H HV category
CINCINNATI P-68
P-69 and P-70
DENISON HF 0
VICKERS M-2950
Description
ARNICA ID oils are petroleum base lubricants specially developed for use in hydraulic systems requiring fluids possessing an extremely high Viscosity Index and a very low pour point for correct operation (ISO-L-HV classification).
Spesification
ISO-L-HV
AFNOR NF E 48603 HV
BS 4231 HSE
DIN 51524 teil 3 HVLP
CETOP RP 91 H HV category
CINCINNATI P-68
P-69 and P-70
DENISON HF 0
VICKERS M-2950
Description
ARNICA ID oils are petroleum base lubricants specially developed for use in hydraulic systems requiring fluids possessing an extremely high Viscosity Index and a very low pour point for correct operation (ISO-L-HV classification).
Spesification
ISO-L-HV
AFNOR NF E 48603 HV
BS 4231 HSE
DIN 51524 teil 3 HVLP
CETOP RP 91 H HV category
CINCINNATI P-68
P-69 and P-70
DENISON HF 0
VICKERS M-2950
Description
ARNICA ID oils are petroleum base lubricants specially developed for use in hydraulic systems requiring fluids possessing an extremely high Viscosity Index and a very low pour point for correct operation (ISO-L-HV classification).
Spesification
–
Description
–
Spesification
ISO-L-HV
AFNOR NF E 48603 HV
DIN 51524 part 3 HVLP
CINCINNATI P-69 and P-70
SPERRY VICKERS I-286-S
Description
eni ARNICA ZF ID are ashless antiwear hydraulic oils for application in hydraulic systems where cleanliness is essential.
APPLICATIONS
eni ARNICA ZF ID oils are especially suitable as hydraulic fluid in:
Hydraulic and electro hydraulic servo controls;
Shock absorbers and other hydraulic equipment subject to wide temperature variations;
Hydraulic valve controls;
Hydraulic signaling systems;
Shipboard equipment;
Control gear of automatic hydro-electric installations.
The use of eni ARNICA ZF ID oils is also recommended, as an alternative to normal hydraulic
oils, for the control and power transmission systems of types of machinery which, due to
design or heavy-duty operating conditions, require oils with an extremely high Viscosity Index (ex. Ceramics and Steel Industry).
In addition eni ARNICA ZF ID oils are especially recommended for many delicate and
precision machines and instruments where variations in braking torque caused by changes in
viscosity must be contained within the closest possible limits.
Spesification
ISO-L-HV
AFNOR NF E 48603 HV
DIN 51524 part 3 HVLP
CINCINNATI P-69 and P-70
SPERRY VICKERS I-286-S
Description
eni ARNICA ZF ID are ashless antiwear hydraulic oils for application in hydraulic systems where cleanliness is essential.
APPLICATIONS
eni ARNICA ZF ID oils are especially suitable as hydraulic fluid in:
Hydraulic and electro hydraulic servo controls;
Shock absorbers and other hydraulic equipment subject to wide temperature variations;
Hydraulic valve controls;
Hydraulic signaling systems;
Shipboard equipment;
Control gear of automatic hydro-electric installations.
The use of eni ARNICA ZF ID oils is also recommended, as an alternative to normal hydraulic
oils, for the control and power transmission systems of types of machinery which, due to
design or heavy-duty operating conditions, require oils with an extremely high Viscosity Index (ex. Ceramics and Steel Industry).
In addition eni ARNICA ZF ID oils are especially recommended for many delicate and
precision machines and instruments where variations in braking torque caused by changes in
viscosity must be contained within the closest possible limits.
Oso
Spesification
DIN 51524 TEIL 2 HLP
AFNOR NF E 48603 HM
CETOP RP 91 H HM
DENISON HF-0
VDMA 24318
BS 4231 HSD
Description
OSO ID is the trademark of a line of high quality hydraulic oils specially developed for use in all types of hydraulic systems and equipment. The oils are formulated from selected paraffinic base stocks treated with antirust, antioxidant, and anti-wear additives (ISO-L-HM). These oils are available in a wide range of viscosity to suit all practical requirements.
Spesification
DIN 51524 TEIL 2 HLP
AFNOR NF E 48603 HM
CETOP RP 91 H HM
DENISON HF-0
VDMA 24318
BS 4231 HSD
Description
OSO ID is the trademark of a line of high quality hydraulic oils specially developed for use in all types of hydraulic systems and equipment. The oils are formulated from selected paraffinic base stocks treated with antirust, antioxidant, and anti-wear additives (ISO-L-HM). These oils are available in a wide range of viscosity to suit all practical requirements.
Spesification
DIN 51524 TEIL 2 HLP
AFNOR NF E 48603 HM
CETOP RP 91 H HM
DENISON HF-0
VDMA 24318
BS 4231 HSD
Description
OSO ID is the trademark of a line of high quality hydraulic oils specially developed for use in all types of hydraulic systems and equipment. The oils are formulated from selected paraffinic base stocks treated with antirust, antioxidant, and anti-wear additives (ISO-L-HM). These oils are available in a wide range of viscosity to suit all practical requirements.
Spesification
DIN 51524 TEIL 2 HLP
AFNOR NF E 48603 HM
CETOP RP 91 H HM
DENISON HF-0
VDMA 24318
BS 4231 HSD
Description
OSO ID is the trademark of a line of high quality hydraulic oils specially developed for use in all types of hydraulic systems and equipment. The oils are formulated from selected paraffinic base stocks treated with antirust, antioxidant, and anti-wear additives (ISO-L-HM). These oils are available in a wide range of viscosity to suit all practical requirements.
Hydroil
Spesification
DIN 51524 Part I
Description
eni Hydroil GF ID is a good quality hydraulic oils specially developed for use in all types of hydraulic systems and equipment. The oils are formulated from selected paraffinic base stocks treated with antirust, antioxidant, and anti-wear additives.
Spesification
DIN 51524 Part I
Description
eni Hydroil GF ID is a good quality hydraulic oils specially developed for use in all types of hydraulic systems and equipment. The oils are formulated from selected paraffinic base stocks treated with antirust, antioxidant, and anti-wear additives.
Gear and Chains
Gears transmit mechanical motion from one component to another and may be used in open or enclosed gears. Due to the huge variety of gears it’s necessary to take into account of the following aspects in order to choose the most suitable lubricant: gears characteristics (size, metallurgy of teeth), operating conditions (load, vibrations and shocks), oil supply system (oil bath, splash, circulation), operating temperatures and other environmental factors that could have a significant impact.
The oils used for lubrication of chains must ensure easy penetration into pins/bushes, providing good grip without any dripping. Such lubricants must create a strong lubricant film, resistant to loads, low tendency to leave residues also when operating at high temperatures and must ensure high resistance to corrosion and water washout.
Blasia
Spesification
FZG (A 8
3/90)
FZG (FVA 54)
FAG FE 8 (DIN 51819-3)
Timken OK load (ASTM D 2782)
4 balls EP (ASTM D 2783)
Description
The BLASIA FMP ID series are very high performance gear oils for lubricating in extreme pressure conditions (EP) the last generation industrial gear reducers, in particular, those extremely compact and of high specific power that could have problems of micropitting damages.
They are formulated with selected paraffinic base stocks and specific additives for a very wide operative exigency, (ISO-L-CKD classification).
Spesification
ISO-L-CKD
US STEEL 224
ANSI/AGMA9005-D94(AGMA250.04)
DIN 51517 TEIL 3 CLP
CINCINNATI MILACRON
DAVID BROWN S1.53.101 (5E)
Description
The BLASIA ID series has been developed to meet the widest range of requirements of EP( Extreme Pressure ) lubrication such as, for instance gears, operating under severe duty ( ISO-L-CKD classification ).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which ensure good high-speed and shock-load performance) and phosphorus compounds ( for low-speed and high-load performance). They thus satisfy the widest range of operational requirements.
Spesification
ISO-L-CKD
US STEEL 224
ANSI/AGMA9005-D94(AGMA250.04)
DIN 51517 TEIL 3 CLP
CINCINNATI MILACRON
DAVID BROWN S1.53.101 (5E)
Description
The BLASIA ID series has been developed to meet the widest range of requirements of EP( Extreme Pressure ) lubrication such as, for instance gears, operating under severe duty ( ISO-L-CKD classification ).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which ensure good high-speed and shock-load performance) and phosphorus compounds ( for low-speed and high-load performance). They thus satisfy the widest range of operational requirements.
Spesification
ISO-L-CKD
US STEEL 224
ANSI/AGMA9005-D94(AGMA250.04)
DIN 51517 TEIL 3 CLP
CINCINNATI MILACRON
DAVID BROWN S1.53.101 (5E)
Description
The BLASIA ID series has been developed to meet the widest range of requirements of EP( Extreme Pressure ) lubrication such as, for instance gears, operating under severe duty ( ISO-L-CKD classification ).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which ensure good high-speed and shock-load performance) and phosphorus compounds ( for low-speed and high-load performance). They thus satisfy the widest range of operational requirements.
Spesification
ISO-L-CKD
US STEEL 224
ANSI/AGMA9005-D94(AGMA250.04)
DIN 51517 TEIL 3 CLP
CINCINNATI MILACRON
DAVID BROWN S1.53.101 (5E)
Description
The BLASIA ID series has been developed to meet the widest range of requirements of EP( Extreme Pressure ) lubrication such as, for instance gears, operating under severe duty ( ISO-L-CKD classification ).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which ensure good high-speed and shock-load performance) and phosphorus compounds ( for low-speed and high-load performance). They thus satisfy the widest range of operational requirements.
Spesification
ISO-L-CKD
US STEEL 224
ANSI/AGMA9005-D94(AGMA250.04)
DIN 51517 TEIL 3 CLP
CINCINNATI MILACRON
DAVID BROWN S1.53.101 (5E)
Description
The BLASIA ID series has been developed to meet the widest range of requirements of EP( Extreme Pressure ) lubrication such as, for instance gears, operating under severe duty ( ISO-L-CKD classification ).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which ensure good high-speed and shock-load performance) and phosphorus compounds ( for low-speed and high-load performance). They thus satisfy the widest range of operational requirements.
Spesification
ISO-L-CKD
US STEEL 224
ANSI/AGMA9005-D94(AGMA250.04)
DIN 51517 TEIL 3 CLP
CINCINNATI MILACRON
DAVID BROWN S1.53.101 (5E)
Description
The BLASIA ID series has been developed to meet the widest range of requirements of EP( Extreme Pressure ) lubrication such as, for instance gears, operating under severe duty ( ISO-L-CKD classification ).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which ensure good high-speed and shock-load performance) and phosphorus compounds ( for low-speed and high-load performance). They thus satisfy the widest range of operational requirements.
Spesification
ISO-L-CKD
US STEEL 224
ANSI/AGMA9005-D94(AGMA250.04)
DIN 51517 TEIL 3 CLP
CINCINNATI MILACRON
DAVID BROWN S1.53.101 (5E)
Description
The BLASIA ID series has been developed to meet the widest range of requirements of EP( Extreme Pressure ) lubrication such as, for instance gears, operating under severe duty ( ISO-L-CKD classification ).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which ensure good high-speed and shock-load performance) and phosphorus compounds ( for low-speed and high-load performance). They thus satisfy the widest range of operational requirements.
Spesification
ISO 6743-6/CKT
ANSI/AGMA D9005 D94
AGMA No. 3S
5S
6S
DIN 51517 T.3
CLP 100
220
320
Description
BLASIA SX ID is an oil developed for the lubrication of gears and bearings operating at high temperatures. It is formulated from a synthetic base (polyalphaolefin) additive-treated to impart appropriate antirust, antiwear properties and exceptional oxidation and thermal stability.
Blasia
Spesification
ISO L-DAB
ISO L-DAJ
DIN 51506 VDL
Voith Turbo
Description
Eni Dicrea SX 32is a synthetic lubricant based on polyalphaolefin for rotary and reciprocating air compressors that allows to considerably prolong the oil charge life if compared with mineral lubricants.
Spesification
ISO L-DAB
ISO L-DAJ
DIN 51506 VDL
Description
Eni Dicrea SX 46 is a synthetic lubricant based on polyalphaolefin for rotary and reciprocating air compressors that allows to considerably prolong the oil charge life if compared with mineral lubricants.
Spesification
DIN 51517-3 CLP
Alfa Laval
ISO 12925-1 CKT
Description
Eni Blasia SX 220 is a synthetic oil for the lubrication of gears and bearings operating at high temperatures (continuous bulk temperatures up to 120 °C with peaks in the hottest points up to 200 °C)
The choice of a high quality synthetic basestock (PAO) and a carefully selected additive system has allowed to get very high performances with particular regard to thermal-oxidation stability.
Eni Blasia SX 220 is recommended for the lubrication of bearings of marine separators, gears and other couplings operating at high temperatures (glassforming machines, steelstrip mills, furnaces and ceramic and paper-making machinery); the product can also be used in rotary air compressors.
Spesification
Alfa Laval
DIN 51517-3 CLP
ISO 12925-1 CKT
Description
Eni Blasia SX 320 is a synthetic oil for the lubrication of gears and bearings operating at high temperatures (continuous bulk temperatures up to 120 °C with peaks in the hottest points up to 200 °C).
The choice of a high quality synthetic basestock (PAO) and a carefully selected additive system has allowed to get very high performances with particular regard to thermal-oxidation stability.
Eni Blasia SX 320 is recommended for the lubrication of bearings of marine separators, gears and other couplings operating at high temperatures (glassforming machines, steelstrip mills, furnaces and ceramic and paper-making machinery).
Arum HT
Spesification
ISO-L-CKD
ISO 12925-L-CKD
ANSI/AGMA 9005-D94
(AGMA 3EP
4EP
5EP
6EP
7EP)
ASLE EP
CINCINNATI MILACRON
DAVID BROWN SI.53.101 level
DIN 51517 teil 3 – CLP
FLENDER BA 7300 Table A
Muller Weingarten DT 55 005
U.S. STEEL 224
Description
ARUM HT ID 220 is a superior quality lubricant formulated from special ester-type synthetic bases which leave no deposits at high temperatures. It is additive-treated to impart antiwear properties and exceptional oxidation resistance.
Compressor Oil
Compressors are used to increase the pressure of air, refrigerant gases and other gases, through mechanical energy. Compressors can be divided into two main families: volumetric and dynamic. The lubricant must reduce friction, minimize wear, remove heat and act as sealing barrier against gas pressure drops.
Eni product line is suitable to satisfy the performance requirements of most demanding specifications. Eni has recently introduced a new product line specially developed for food and pharmaceutical industries.
Dicrea
Spesification
ISO-L-DAA
ISO-L-DAG
DIN 51506 VDL
Description
eniDICREAID oils are designed for the lubrication of reciprocatingTheytypes) are.formulated from selected paraffi antioxidant, antirust and antiwear additives.
Spesification
ISO-L-DAA
ISO-L-DAG
DIN 51506 VDL
Description
eniDICREAID oils are designed for the lubrication of reciprocatingTheytypes) are.formulated from selected paraffi antioxidant, antirust and antiwear additives.
Spesification
ISO-L-DAA
ISO-L-DAG
DIN 51506 VDL
Description
eniDICREAID oils are designed for the lubrication of reciprocatingTheytypes) are.formulated from selected paraffi antioxidant, antirust and antiwear additives.
Spesification
ISO-L-DAA
ISO-L-DAG
DIN 51506 VDL
Description
eniDICREAID oils are designed for the lubrication of reciprocatingTheytypes) are.formulated from selected paraffi antioxidant, antirust and antiwear additives.
Spesification
ISO-L-DAA
ISO-L-DAG
DIN 51506 VDL
Description
eniDICREAID oils are designed for the lubrication of reciprocatingTheytypes) are.formulated from selected paraffi antioxidant, antirust and antiwear additives.
Spesification
ISO-L-DAB
ISO-L-DAH
DIN 51506 VDL
Description
DICREA SX ID lubricants are synthetic oils with a polyalphaolefin base treated with antioxidant, antirust and antiwear additives. They are specifically designed for the lubrication of air compressors.
Spesification
ISO L-DAB
ISO L-DAJ
DIN 51506 VDL
Voith Turbo
Description
Eni Dicrea SX 32 is a synthetic lubricant based on polyalphaolefin for rotary and reciprocating air compressors that allows to considerably prolong the oil charge life if compared with mineral lubricants.
Spesification
ISO L-DAB
ISO L-DAJ
DIN 51506 VDL
Description
Eni Dicrea SX 46 is a synthetic lubricant based on polyalphaolefin for rotary and reciprocating air compressors that allows to considerably prolong the oil charge life if compared with mineral lubricants.
Spesification
ISO-L-DAB
ISO-L-DAH
DIN 51506 VDL
Description
DICREA SX ID lubricants are synthetic oils with a polyalphaolefin base treated with antioxidant, antirust and antiwear additives. They are specifically designed for the lubrication of air compressors.
Betula
Spesification
DIN 51503 KC
DIN 51303 KA
MM-O-2008 type II (NATO O-283)
MM-O-2008 type IV (NATO O-290)
VV-L-825b type II (NATO O-283)
VV-L-825b type IV (NATO O-290)
IRE
SABROE
ZANUSSI ELECTROLUX
Description
The BETULA S ID series are synthetic oils with superior characteristics which make them suitable for lubrication of refrigeration equipment and other machinery operating at very low temperatures.
Turbine Oil
Turbines are defined as rotating prime movers, where the energy of a fluid is transformed into mechanical energy, generally intended for production of electricity or propulsion. Steam, hot gases produced directly from burning fuel and water are the commonly used fluids.
Turbine oil must lubricate the shaft bearings, remove heat, operate the servomechanisms of regulating valves and lubricate the gear reduction units, if present.
Eni product line satisfies the needs of lubrication of all types of gas, steam and hydraulic turbines, also in combined cycle plants.
The partnership with top class manufacturers made it possible to improve formulations over the years, guaranteeing higher levels of performance.
OTE
Spesification
DIN 51515
GENERAL ELECTRIC GEK 28413
KWU TLV 901304/01
BS 489
CINCINNATI P-38 lvl(ISOVG32)
P-55 level (ISO VG 46)
P-54 level (ISO VG 68)
Description
eni OTE ID products are designed to satisfy even the most severe lubrication requirements of steam, gas and water turbines. All grades are formulated utilizing highly refined group II base stocks with the latest technology additive. The wide range of viscosities available ensures that all possible lubricating requirements can be met.
Spesification
ISO 6743/5
ISO-L-TSA/-TSE/-TGA/-TGB/
ISO 8068
DIN 51515-1 L-TD
DIN 51515-2 L-TG
ASTM D 4304 type 2
ALSTOM HTDG 90117 V0001T
ALSTOM Power Sweden MAT812109
CATERPILLAR / SOLAR ES 9-224U
GM No. LJ-03-1-97
GENERAL ELECTRIC GEK 24138
etc
Description
OTE GT ID are superior quality lubricants developed expressly for use in industrial gas turbines. They are formulated utilizing highly refined group II base stocks with the latest technology additive to obtain the exceptional resistance to oxidation and antirust and mild EP properties.
Glides and Slideways
The tool slides movement between machine tools and guides must be regular, through a stable and uniform contact, avoiding the stick-slip phenomenas caused by lubricant film breaking during their movement. Therefore, the oil lubricant must have excellent adesivity and greasing properties.
Exidia
Spesification
Stanimuc GB
Stanimuc GA
DIN 51502 CGLP
ISO 11158 HG
ISO 6743/13 GA
ISO 6743/13 GB
Description
Eni Exidia HG 32 is a premium quality lubricant especially designed for slideways, even under
high loads, with circulation and total loss lubrication systems.
It is formulated with high quality base-stocks and an unique additive package that provides
excellent antistick-slip, antiwear and antirust properties.
Eni Exidia HG 32 is recommended as hydraulic fluid in those machines, especially grinding
machines, where a single oil is used for guides and hydraulic drives lubrication.
Spesification
DIN 51502 CGLP
Stanimuc GA
Stanimuc GB
ISO 11158 HG
ISO 6743/13 GA
ISO 6743/13 GB
Description
Eni Exidia HG 68 is a premium quality lubricant especially designed for slideways, even under high loads, with circulation and total loss lubrication systems.
It is formulated with high quality base-stocks and an unique additive package that provides
excellent antistick-slip, antiwear and antirust properties.
Eni Exidia HG 68 is recommended as hydraulic fluid in those machines, especially grinding
machines, where a single oil is used for guides and hydraulic drives lubrication.
Spesification
Stanimuc GA
DIN 51502 CGLP
Stanimuc GB
ISO 6743/13 GA
ISO 6743/13 GB
ISO 12925-1 CKE
Description
Eni Exidia HG 220 is a premium quality lubricant especially designed for slideways, even
underhigh loads, with circulation and total loss lubrication systems.
It is formulated with high quality base-stocks and an unique additive package that provides
excellent antistick-slip, antiwear and antirust properties.
Eni Exidia HG 220 is recommended as hydraulic fluid in those machines, especially grinding
machines, where a single oil is used for guides and hydraulic drives lubrication.
Heat Transfer Oils
The heating technique of solids, liquids or gases in industrial systems is of indirect type. This technique involves the use of a thermal carrier (heat transfer oil) that takes heat from a hot source (heat generator) and transfers it where needed. Despite higher costs and operative complexity, several advantages are achieved by an indirect heating system. For example the greater ease of temperature control and uniformity and the ability to serve more users by a single heat source. Also safety is maximized because users are not directly in contact with the heat source.
Eni heat transfer oils are formulated with high quality base oils to ensure excellent heat transfer and a long term protection of the circuits against corrosion and deterioration.
Alaria
Spesification
Max Outlet temp 315 celcius
Description
ALARIA XT ID is used for filling heat transfer units. It has excellent oxidation stability and withstand thermal decomposition, being formulated from carefully selected paraffinic base stocks. They are available in two grades.
Spesification
Boiler ops under 300CelciusDeg
Description
eni Alaria S ID is a synthetic heat transfer fluid based on alkyl benzene. It is a better heat transfer fluid as compared to any mineral oil based thermic fluids due to its special chemistry.
Spesification
Max Boiler Outlet temp 295 cel
max boiler wall temp 325 celci
Description
ALARIA ID is used for filling heat transfer units. They have good oxidation stability and withstand thermal decomposition, being formulated from carefully selected paraffinic base stocks. They are available in two grades.
Spesification
Max Boiler Outlet temp 295 cel
max boiler wall temp 325 celci
Description
ALARIA ID is used for filling heat transfer units. They have good oxidation stability and withstand thermal decomposition, being formulated from carefully selected paraffinic base stocks. They are available in two grades.
Spesification
Max Boiler Outlet temp 295 cel
max boiler wall temp 325 celci
Description
ALARIA ID is used for filling heat transfer units. They have good oxidation stability and withstand thermal decomposition, being formulated from carefully selected paraffinic base stocks. They are available in two grades.
General Purpose
Circulating oils are designed for the centralized lubrication of various systems of industrial machines: bearings, gears, etc.
Eni offers a wide range of products, from pure mineral oils for lubrication of weakly loaded systems operating at a moderate temperatures, to higher technology oils designed for the most severe operating conditions.
Acer
Spesification
BELOIT (Chart 1-21-127 1982)
CARCANO (A4-415-5 I 1981)
Description
ACER MPK ID special lubricants have been expressly designed for the lubrication of rolling-contact bearings and gears operating at high temperatures in papermaking machinery.
They are formulated from special paraffinic bases and specific additives which impart detergent, antiwear, antirust, demulsibility and oxidation-resistance properties.
Spesification
ISO-L-HL
ISO-L-DAB
DIN 51056 VBL
DIN 51524 TEIL 1 HL
DENISON HF 1A
BS4231 HSC
AFNOR NF E 48603 HL
Description
ACER ID oils are high quality oils for use in circulation systems and in hydraulics circuits. They are obtained from selected paraffinic base stocks treated with antioxidant and antirust additives (R & O oils, ISO-L-DAB, ISO-L-HL classifications).
They are available in many grades that cover a very broad range of viscosity and are therefore able to meet all requirements of practical interest.
Spesification
ISO-L-HL
ISO-L-DAB
DIN 51056 VBL
DIN 51524 TEIL 1 HL
DENISON HF 1A
BS4231 HSC
AFNOR NF E 48603 HL
Description
ACER ID oils are high quality oils for use in circulation systems and in hydraulics circuits. They are obtained from selected paraffinic base stocks treated with antioxidant and antirust additives (R & O oils, ISO-L-DAB, ISO-L-HL classifications).
They are available in many grades that cover a very broad range of viscosity and are therefore able to meet all requirements of practical interest.
Spesification
ISO-L-HL
ISO-L-DAB
DIN 51056 VBL
DIN 51524 TEIL 1 HL
DENISON HF 1A
BS4231 HSC
AFNOR NF E 48603 HL
Description
ACER ID oils are high quality oils for use in circulation systems and in hydraulics circuits. They are obtained from selected paraffinic base stocks treated with antioxidant and antirust additives (R & O oils, ISO-L-DAB, ISO-L-HL classifications).
They are available in many grades that cover a very broad range of viscosity and are therefore able to meet all requirements of practical interest.
Spesification
ISO-L-HL
ISO-L-DAB
DIN 51056 VBL
DIN 51524 TEIL 1 HL
DENISON HF 1A
BS4231 HSC
AFNOR NF E 48603 HL
Description
ACER ID oils are high quality oils for use in circulation systems and in hydraulics circuits. They are obtained from selected paraffinic base stocks treated with antioxidant and antirust additives (R & O oils, ISO-L-DAB, ISO-L-HL classifications).
They are available in many grades that cover a very broad range of viscosity and are therefore able to meet all requirements of practical interest.
Spesification
ISO-L-HL
ISO-L-DAB
DIN 51056 VBL
DIN 51524 TEIL 1 HL
DENISON HF 1A
BS4231 HSC
AFNOR NF E 48603 HL
Description
ACER ID oils are high quality oils for use in circulation systems and in hydraulics circuits. They are obtained from selected paraffinic base stocks treated with antioxidant and antirust additives (R & O oils, ISO-L-DAB, ISO-L-HL classifications).
They are available in many grades that cover a very broad range of viscosity and are therefore able to meet all requirements of practical interest.
Spesification
ISO-L-HL
ISO-L-DAB
DIN 51056 VBL
DIN 51524 TEIL 1 HL
DENISON HF 1A
BS4231 HSC
AFNOR NF E 48603 HL
Description
ACER ID oils are high quality oils for use in circulation systems and in hydraulics circuits. They are obtained from selected paraffinic base stocks treated with antioxidant and antirust additives (R & O oils, ISO-L-DAB, ISO-L-HL classifications).
They are available in many grades that cover a very broad range of viscosity and are therefore able to meet all requirements of practical interest.
Spesification
ISO-L-HL
DIN 51524 TEIL 1 HL
BS 4231 HSC
AFNOR NF E 48603 HL
ISO-L-DAB
DIN 51056 VBL
DENISON HF 1A
Description
eni Acer ID oils are high quality oils for use in circulation systems and in hydraulics circuits.
They are obtained from selected paraffinic base stocks treated with antioxidant and antirust
additives (R & O oils, ISO-L-DAB, ISO-L-HL classifications). They are available in many grades
that cover a very broad range of viscosity and are therefore able to meet all requirements of
practical interest.
Spesification
ISO-L-HL
ISO-L-DAB
DIN 51056 VBL
DIN 51524 TEIL 1 HL
DENISON HF 1A
BS4231 HSC
AFNOR NF E 48603 HL
Description
ACER ID oils are high quality oils for use in circulation systems and in hydraulics circuits. They are obtained from selected paraffinic base stocks treated with antioxidant and antirust additives (R & O oils, ISO-L-DAB, ISO-L-HL classifications).
They are available in many grades that cover a very broad range of viscosity and are therefore able to meet all requirements of practical interest.
Spesification
ISO-L-HL
ISO-L-DAB
DIN 51056 VBL
DIN 51524 TEIL 1 HL
DENISON HF 1A
BS4231 HSC
AFNOR NF E 48603 HL
Description
ACER ID oils are high quality oils for use in circulation systems and in hydraulics circuits. They are obtained from selected paraffinic base stocks treated with antioxidant and antirust additives (R & O oils, ISO-L-DAB, ISO-L-HL classifications).
They are available in many grades that cover a very broad range of viscosity and are therefore able to meet all requirements of practical interest.